top of page
phantomlogo.png
phantombackground.jpeg
sca44 font_edited.png

$9,950  $9,450

  • 4ft x 4ft Working Area

  • 9.8 Inch Gantry Height

  • Welded Frame w/ Steel Legs

  • Aluminum T-Slot Clamping Table

  • Air cooled spindle 4.5KW

  • Oil-mist Cooling system

  • 220V Single Phase 4.5KW

  • Linear XZ and Y guide system with Ball Screw Z 

  • Automatic Controlled Pneumatic Rollers

  • Pendant Control System

  • Manual Pump Lubrication System 

WhatsApp Image 2022-03-21 at 6.47.43 PM.jpeg

Steel legs can be left off so the machine can sit on a table, but you need a strong table.  Machine weight 1380lbs, 1200lbs without the legs.

SCA Sale!

$500 OFF

while supplies last

phantombackground.jpeg
scv44 font_edited.png

$10,950

Bakelite, Multi-Zone Vac Table

4ft x 4ft Working Area

9.8 Inch Gantry Height

Welded Frame w/ Steel Legs

Air cooled spindle 4.5KW

Oil-mist Cooling system

220V Single Phase 4.5KW

Linear XZ and Y guide system with Ball Screw Z 

Pendant Control System

Manual Pump Lubrication System 

WhatsApp Image 2022-03-21 at 6.47.34 PM.jpeg

Steel legs can be left off so the machine can sit on a table, but you need a strong table.  Machine weight 1380lbs, 1200lbs without the legs.

phantombackground.jpeg
Download Brochures
SC44floorplan copy.jpg

Floor Plan

phantombackground.jpeg

DESCRIPTION:

The SC Series CNC Router is our newest series with our most cost-effective and quality built CNC Router that opens many avenues for your business. These machines have a small 6' x 6' footprint, but pack a huge punch with sturdiness and quality of cuts.  Our machines have a tolerance of +/- 0.03 across 12' ft so these 4' x 4' machines are extremely accurate.  The SC CNC Series is constructed with a machine bed made from .180 mild steel square tube. This frame is welded and laser aligned to with +_ .030 inch end to end. Industrial quality linear bearings with high precision rails on every axis give less rolling moment resistance which translates to more torque from the motors. The SC CNC Series CNC router comes equipped with a 6.1 HP VFD driven Air cooled spindle, ER32 collets and a dust collection hood that concentrates airflow at the cutter provides optimal dust collection performance. The multi-zone vacuum with t-slot table is constructed from a very stable water proof Bakelite material. This ensures the table holds a strong suction and tight tolerances for precision cutting. For machining thin or small sheet materials that are not easily vacuumed the table has built in clamp slots. The machines are equipped with pneumatic rollers. This attachment will prevent materials from moving during the cut by providing a high amount of down pressure on the material.
The SC CNC series is powered by large stepper motors with gear reduction just like our larger machines.  These CNC's are controlled by a DSP A11 pendant.  This ensures that your cutting is never interrupted by Windows updates or malware. EVERY machine sold by us is fully quality tested at our facility in North Carolina.

phantombackground.jpeg

Fully Welded Frame

Fully Welded bed is CNC machined to ensure accuracy and precision.

Resized_IMG_0014.jpeg

CNC TABLE-VACUUM WITH T-SLOT TABLE

Vacuum tables are common in cnc machines. Besides its firm holding, a vacuum table can also flatten boards and make closed shaped cut-outs more easily without obstructions like clamps in the way of the tool path.

 

The vacuum table surface is made from Phenol Resin Panels  (Bakelite) instead of Hard PVC Boards for better strength and wear resistance. This will provide a longer lifespan in a tough shop environment. The vacuum table can be control with 4 independent gate valves.

VACUUM PUMP

2.2KW-Vacuum Pump
Rotary vane vacuum pumps and the piping are available for your table.

MACHINE RACK AND PINION

Phantom CNC Systems uses a 1.5M helical tooth rack and pinion system. This allows for smooth high speed, high precision and low noise operation. We use PMI 25 Linear guides with flange sliders on all axis. 

DUST COVER

The machine is designed with the dust covers on the guide rails and the helical rack and pinions.


The Y-axis has double-layer sheet metal design for debris-proof operation. This extends the life of the drive system.

OMRON LIMIT SWITCHES

The limit switches are activated by proximity to steel items and can be tested by placing a screwdriver or something similar on the activation face (top). When activated, a LED should light. If the LED does not come on, the switch or wiring is faulty.

Z AXIS STRUCTURE

The Spindle alone is 22 lbs.  After it has been assembled, the Z Axis section weighs more than 200 lbs. We use a high precision and high speed ball screw system with a micro steppers watt drive and brake motor to move the Z axis.

Z AXIS PLATE

The Z Axis mounting plate is made anodized aviation aluminum. The spindle is fixed on the high-quality aviation aluminum T6061/6063 plate. The Z-axis uses a TBI High-Precision Ball-screw. The ball screw connects to the Delta brake motor with a disc coupler that protects the ball screw in case of crashes.

6.1HP  AIR COOLING SPINDLE

All Phantom CNC Systems machines comes standard with high-frequency collet spindle. These precision spindles require no maintenance and use industry-standard ER collets. They come fully programmable from speeds of 6000 to 18000 RPM and come complete with a vacuum hood and wrenches.

CNC TOOL CALIBRATION

High precision auto tool calibrator. This makes calibrating tool lengths easy and quick. This offset will automatically apply to your chosen tool.

WATER-OIL MIST COOLING SYSTEM

  • Cooling, lubricating, and cleaning the tooling can be completed at one time during processing.

  • It can increase processing speed, save processing time, cost and reduce tool wear.

  • It is helpful to ensure the processing-quality and the best use of cutting tools.

  • Processing alloys or super-hard materials need this system.

PNUEMATIC ROLLERS

The roller pressure is distributed on both sides of the spindle, which can effectively prevent the material from moving on the table when processing small materials or materials that are not easily suctioned or clamped.  Our rollers provide up to 600lbs of downward pressure. 

FEATURES:

4′ x 4′ working space with only a 6' x 6' footprint.

6HP VFD driven Air-cooled spindle with ER25 collets

Multi-zone vacuum table with T slots for clamping.

Rotary vane vacuum pumps with muffler are available for SCV.

Industrial stepper motors with gear reduction. The whole machine equipped 1:4 Reducer, ensuring very high torque and smooth operation.

FEATURES:

Z-axis assemblies use aviation-grade aluminum alloy T6061/6063, which are all made on high precision machining centers.
Pendant controller made for user friendly interface controls without the worry of Windows machine and upgrade issues.

bottom of page