phantomlogo.png
background.jpg

Starting At

$34,500

The amount of down time your machine experience while you are changing tools and bits would surprise you.  This fully automatic tool changing machine changes tools out in a matter of seconds increasing your production and your profits.

"We fix problems before you ever know you have them by our engineering."

~Steve Wallace, CEO

WHY SHOULD YOU CHOOSE AN ATC CNC ROUTER?

Sometimes when using a CNC router to make cuts it is necessary to change out tooling. With a single tool spindle this operation can take valuable production time and introduces another point in the production process for human error to be introduced.


The PHANTOM CNC SYSTEM-ATC CNC machine reduces production time by automatically changing cutters between tool paths, thus eliminating the need for the CNC operator to change and zero tools individually. The ATC feature allows our router to do the full job, even when different tooling is required to make different types of cuts.  Signs and complex 3D carvings are a good example of this. A machine equipped with an ATC can perform operations normally done on other pieces of equipment, eliminating the need for additional machines in the shop.


The ATC router includes an automatic tool height system. This unique system can not only change the tools but uses a sensor to compensate for the tool length. With 8 or 10 tools in a linear rack and a change over time that only takes  about 8 seconds this is a very productive machine. With cutting speed of up 500 inches ipm and free speed of 1000 ipm it is ideally suitable for processing of cabinets, wooden doors, solid wood furniture in a high speed shop.

phantombackground.jpeg

WHY SHOULD YOU CHOOSE AN ATC CNC ROUTER?

Sometimes when using a CNC router to make cuts it is necessary to change out tooling. With a single tool spindle this operation can take valuable production time and introduces another point in the production process for human error to be introduced.


The PHANTOM CNC SYSTEM-ATC CNC machine reduces production time by automatically changing cutters between tool paths, thus eliminating the need for the CNC operator to change and zero tools individually. The ATC feature allows our router to do the full job, even when different tooling is required to make different types of cuts.  Signs and complex 3D carvings are a good example of this. A machine equipped with an ATC can perform operations normally done on other pieces of equipment, eliminating the need for additional machines in the shop.


The ATC router includes an automatic tool height system. This unique system can not only change the tools but uses a sensor to compensate for the tool length. With 8 or 10 tools in a linear rack and a change over time that only takes  about 8 seconds this is a very productive machine. With cutting speed of up 500 inches ipm and free speed of 1000 ipm it is ideally suitable for processing of cabinets, wooden doors, solid wood furniture in a high speed shop.

phantombackground.jpeg
Download Brochure

Floor Plan

phantombackground.jpeg

Fully Welded Frame

Fully Welded bed is CNC machined to ensure accuracy and precision.

Vacuum Table With T-Slots

Vacuum tables are common in cnc routers. Besides its firm holding, a vacuum table can also flatten boards and make closed shaped cut-outs more easily without obstructions like clamps in the way of the toolpath.

 The vacuum table surface is made from Phenol Resin Panels ( Bakelite ) instead of Hard PVC Boards for better strength and wear resistance. This will provide a longer lifespan in a tough shop environment. The vacuum table can be control with 4 independent gate valves.

VACUUM PUMP

2.2KW-Vacuum Pump
Rotary vane vacuum pumps and the piping are available for your table.

RETRACTABLE ALIGNMENT PINS

For easy sheet alignment, retractable alignment pins are used to precisely place and align various size materials.

MACHINE RACK AND PINION

PHANTOM CNC SYSTEMS T ATC CNC  uses a 1.5M helical tooth rack and pinion system. This allows for smooth high speed, high precision and low noise operation. We use PMI 25 Linear guides with flange sliders on all axis. 

DUST COVER

The machine is designed with the dust covers on the guide rails and the helical rack and pinions.


The Y-axis has double-layer sheet metal design for debris-proof operation. This extends the life of the drive system.

OMRON LIMIT SWITCHES

The limit switches are activated by proximity to steel items and can be tested by placing a screwdriver or something similar on the activation face (top). When activated, a LED should light. If the LED does not come on, the switch or wiring is faulty.

Z AXIS STRUCTURE

The Spindle alone is 22 lbs.  After it has been assembled the Z Axis  section weighs more than 200 lbs. We use a high precision and high speed ball screw system with a Delta 750 watt drive and brake motor to move the Z axis.

Z AXIS PLATE

The Z Axis mounting plate is made anodized aviation aluminum. The spindle is fixed on the high-quality aviation aluminum T6061/6063 plate. The Z-axis uses a TBI High-Precision Ball-screw. The ball screw connects to the Nema 34 motor  with a disc coupler that protects the ball screw in case of crashes.

16.1HP ATC AIR COOLING SPINDLE

We utilize a 16.1HP auto tool change spindle. We use 18000 rpm or 24000 rpm for most applications.

CNC TOOL CALIBRATION

High precision auto tool calibrator. This makes calibrating tool lengths easy and quick. This offset will automatically apply to your chosen tool.

WATER-OIL MIST COOLING SYSTEM

  • Cooling, lubricating, and cleaning the tooling can be completed at one time during processing.

  • It can increase processing speed, save processing time, cost and reduce tool wear.

  • It is helpful to ensure the processing-quality and the best use of cutting tools.

  • Processing alloys or super-hard materials need this system.

INDEPENDENT CONTROL CABINET

We use a stand alone control system that is completely separate of a PC controller.  This allows full control of the CNC without worry of Windows updates or controller software updates that could slow down your business. 

PROFESSIONAL INDUSTRIAL GRADE CONTROL SYSTEM

CNC Routers adopt advanced open-architecture CNC controllers, with built-in high-performance industry computers, LCD screens, and combining with servo axis, spindle, and MPG axis, built-in PLC ( Programmable Logic Controller ) and USB interface, Compact Flash Card reading device.


Performance Indicator
Resistance to vibration conforms to the GB/T 2423.10-2008 Standards.
The product stands rigid temperature tests and conforms to the industrial standards of GB/T 2423.102-2008.

PNEUMATIC ROLLERS

The roller pressure is distributed on both sides of the spindle, which can effectively prevent the material from moving on the table when processing small materials or materials that are not easily suctioned or clamped.  Rollers provide 600lbs of downward pressure.

background.jpg

Starting At

$38,500

Our rugged T series with a 4th axis rotary to turn your project into something amazing. 

T SERIES 4 AXIS ROTARY

4 Axis Rotary ATC CNC Router Machine:
ATC CNC router has an automatic tool change function including carousel tool change type and linear tool change type. According to the processing requirements, automatic tool change can be realized without manual participation, which further improves the machining efficiency. To know ATC CNC router machine price information, you can leave a message through our website or directly call us. To learn more about our ATC CNC Router, browse our range below:

  • ATC 4th Rotary device: Rotary could be added on the side of the machine table or put it on the machine table, depends on your using habit. You can choose the proper rotary's diameter and length according to your materials. It's mainly be used for processing some round or square materials.

  • ATC 4th Rotary device: Rotary could be added on the side of the machine table or put it on the machine table, depends on your using habit.

  • You can choose the proper rotary's diameter and length according to your materials. It's mainly be used for processing some round or square materials.

phantombackground.jpeg

T ATC MACHINE ROTARY ON TABLE

T 4′ x 8′, 5' x 10' ATC CNC Machine 4 axis rotary on table.

Rotary on Table: 4-Axis rotary table assembly comes complete with a 3-jaw chuck, tailstock, and guide track for easy tailstock movement and center alignment. The addition of 4-axis rotary table assembly adds greater functionality to the machine's capabilities allowing for 4-axis cutting in both 2D and 3D carving and indexing functions.


(PHANTOM CNC SYSTEM rotary size has 0-3”, 0-4”, 0-6”, 0-7.9”, diameter rotary axis for your choice).

220v 1ph 50 amp power

Profession side rotary structure.
Do you usually use the rotary?
Does your work need a big rotary?
The Profession of the rotary structure can solve these questions.

(PHANTOM CNC SYSTEM rotary size has 0-7.9”, 0-11.8”, 0-15.7”, 0-19.7”, diameter rotary axis for your choice).

ATC cnc system.jpg
4 axis (1).jpg
phantombackground.jpeg

4th Axis Rotary

Full Length 4-Axis rotary table assembly comes complete with a 3-jaw chuck, tailstock, and guide track for easy tailstock movement and center alignment. The addition of 4-axis rotary table assembly adds greater functionality to the machine's capabilities allowing for 4-axis cutting in both 2D and 3D carving and indexing functions. (PHANTOM CNC SYSTEM rotary size has 0-3”, 0-4”, 0-6”, 0-7.9”, diameter rotary axis for your choice).

FEATURES:

4′ x 8′ and 5′ x 10′ stock sizes (Special sizes available upon request.)
16.1HP VFD Automatic Tool Change Air cooled spindle ISO 130 
Multi-zone vacuum with t-slot table with gate valves for zone control.

220V 1ph 50 amp power
Rotary vane vacuum pumps with mufflers are avaiable.
Delta servo motors and drives .
Japanese high precision gear reduction.

FEATURES:

Z-axis transmission parts and use aviation aluminum alloy T6061/6063
Air operated dust collection hood
Automatic Tool Height calibration sensor
Automatic Lubrication system
Independent Industrial control cabinet
Multi-software compatibility: Compatible with various cad/cam softwares

4th Axis Rotary is an option