The Ultimate Industrial Machine.
Our most industrial machine with a 300mm rotary 4th axis and tail stock that slide full length for very large rotary jobs.
TIR SERIES 4 AXIS ROTARY
4 Axis Rotary ATC CNC Router Machine：
ATC CNC router has an automatic tool change function including carousel tool change type and linear tool change type. According to the processing requirements, automatic tool change can be realized without manual participation, which further improves the machining efficiency. To know ATC CNC router machine price information, you can leave a message through our website or directly call us. To learn more about our ATC CNC Router, browse our range below:
ATC 4th Rotary device: Rotary could be added on the side of the machine table or put it on the machine table, depends on your using habit. You can choose the proper rotary's diameter and length according to your materials. It's mainly be used for processing some round or square materials.
ATC 4th Rotary device: Rotary could be added on the side of the machine table or put it on the machine table, depends on your using habit.
You can choose the proper rotary's diameter and length according to your materials. It's mainly be used for processing some round or square materials.
TIR ATC MACHINE ROTARY ON TABLE
TI4′ x 8′ ATC CNC Machine 4 axis rotary on table
Rotary on Table: 4-Axis rotary table assembly comes complete with a 3-jaw chuck, tailstock, and guide track for easy tailstock movement and center alignment. The addition of 4-axis rotary table assembly adds greater functionality to the machine's capabilities allowing for 4-axis cutting in both 2D and 3D carving and indexing functions.
(PHANTOM CNC SYSTEM rotary size has 0-3”, 0-4”, 0-6”, 0-7.9”, diameter rotary axis for your choice).
Rotary by side:
Profession side rotary structure.
Do you usually use the rotary?
Does your work need a big rotary?
The Profession of the rotary structure can solve these questions.
(PHANTOM CNC SYSTEM rotary size has 0-7.9”, 0-11.8”, 0-15.7”, 0-19.7”, diameter rotary axis for your choice).
Fully Welded Frame
Fully Welded bed is CNC machined to ensure accuracy and precision.
Vacuum Table With T-Slots
Vacuum tables are common in cnc routers. Besides its firm holding, a vacuum table can also flatten boards and make closed shaped cut-outs more easily without obstructions like clamps in the way of the toolpath.
The vacuum table surface is made from Phenol Resin Panels ( Bakelite ) instead of Hard PVC Boards for better strength and wear resistance. This will provide a longer lifespan in a tough shop environment. The vacuum table can be control with 4 independent gate valves.
Rotary vane vacuum pumps and the piping are available for your table.
RETRACTABLE ALIGNMENT PINS
For easy sheet alignment, retractable alignment pins are used to precisely place and align various size materials.
MACHINE RACK AND PINION
PHANTOM CNC SYSTEMS T ATC CNC uses a 1.5M helical tooth rack and pinion system. This allows for smooth high speed, high precision and low noise operation. We use PMI 25 Linear guides with flange sliders on all axis.
The machine is designed with the dust covers on the guide rails and the helical rack and pinions.
The Y-axis has double-layer sheet metal design for debris-proof operation. This extends the life of the drive system.
OMRON LIMIT SWITCHES
The limit switches are activated by proximity to steel items and can be tested by placing a screwdriver or something similar on the activation face (top). When activated, a LED should light. If the LED does not come on, the switch or wiring is faulty.
Z AXIS STRUCTURE
The Spindle alone is 22 lbs. After it has been assembled the Z Axis section weighs more than 200 lbs. We use a high precision and high speed ball screw system with a Delta 750 watt drive and brake motor to move the Z axis.
Z AXIS PLATE
The Z Axis mounting plate is made anodized aviation aluminum. The spindle is fixed on the high-quality aviation aluminum T6061/6063 plate. The Z-axis uses a TBI High-Precision Ball-screw. The ball screw connects to the Nema 34 motor with a disc coupler that protects the ball screw in case of crashes.
16.1HP ATC AIR COOLING SPINDLE
We utilize a 16.1HP auto tool change spindle. We use 18000 rpm or 24000 rpm for most applications.
CNC TOOL CALIBRATION
High precision auto tool calibrator. This makes calibrating tool lengths easy and quick. This offset will automatically apply to your chosen tool.
WATER-OIL MIST COOLING SYSTEM
Cooling, lubricating, and cleaning the tooling can be completed at one time during processing.
It can increase processing speed, save processing time, cost and reduce tool wear.
It is helpful to ensure the processing-quality and the best use of cutting tools.
Processing alloys or super-hard materials need this system.